Double-offset flanged butterfly valve, available with long or short face-to-face length for use in most common flow control applications. Long service life, as the media does not come into contact with the bearing, and due to the wear-resistant, corrosion and infiltration-proof seat with weld overlay. Suitable for use water distribution, water treatment, pre-treated waste water, dams, power plants, industry and pressure management.

Flanged Butterfly Valve Material and Standard

Double Flanged Butterfly Valve Features

• Bidirectional sealing, no flow direction of the medium;
• Valve body vulcanized EPDM, reliable sealing;
• A dial with an opening indication showing the position of the disc switch;
• Flow characteristics straight line, good regulation performance.

Clean the inner cavity and sealing cover of the valve before installation. This butterfly valve can be installed on the horizontal, vertical and any Angle pipe, and can be used in both directions. The butterfly valve must be in the closed position during installation to ensure that the disc does not collide with the pipe flange. Make sure the flange welding is correct. After the butterfly valve is installed, it is not allowed to weld the flange again, so as not to burn the rubber parts and the anti-corrosion coating. For specific use, please consult VALTECCN Double Flanged Butterfly Valve Manufacturers.